Tag Archives: stop drafts under doors

How to: Make a “Door Snake” or “Draft Stopper”

Want to know a great way to help your budget in the colder months? Winter-proofing your house or apartment.

If you live somewhere that experiences temperatures below 60 degrees (which is much of the world) your skin and wallet will thank you for taking some simple steps. Winter-proofing is beneficial because it can help your heater work less hard (due to plugging up drafts and beefing up insulation), keep your living areas warmer, decrease your energy needs, and decrease your energy bills. All good things.

Some tips will not apply to you depending on what type of structure you live in and how much space you have to heat. A quick Google search brings up Yahoo’s list of 12 Ways to Winter-Proof Your Home, Women’s Day’s Guide to Winter-Proofing Your House,  and UK Money’s How to Winter-Proof Your Home and Beat the Big Freeze

A common thing among all winter-proofing lists is insulation.

Regardless of whether you have a 5-bedroom home in the suburbs or a one-bedroom apartment in the city, insulating your doors and windows will keep drafts at bay and heating bills manageable.

One way to insulate windows is to use plastic window cling or bubble wrap. I mashed several layers of bubble wrap over the bedroom window and duct taped it in place. There is definitely a noticeable difference in how much cold gets through the window now.

This guide is to show you another simple way to avoid under-door drafts: by making a door snake!

It may seem intimidating, but my friend B and I made two gorgeous draft stoppers in under 20 minutes.

 

You will need:

  • 1 sewing machine (or needle, thread, time, and patience)
  • Material approximately 1 yard by 1 foot (use thicker cloths to stand up to more wear)
  • Approximately 6-10 cups filler (rice, beans, sand, salt, kitty litter, etc)

Step 1: Lay your fabric pattern-side up, and flip it over onto itself so the ‘inside’ faces out. Pin along a straight line.

Step 2: Use a basic stitch to sew along the pins from end to end. You can measure the length of your doorway, leave an extra 2 inches per end. This doesn’t have to be super exact.

Sew all the way along the length. This will create a tube with open ends on both sides.

Step 3: Sew up one end of the tube. Make sure the two sets of stitches overlap to fully close that end.

Step 4: Now flip the tube inside-out so that the stitches are on the inside and the pattern is on the outside.

This is one of B’s 2 cats, she was very interested in what we were doing. Mostly the parts involving string.

Step 5: Measure against your door frame to make sure you fill the tube to the right length. Cut off the extra, leaving a few inches on the un-sewn end.

Step 6: Take the filler material, and hold open one end. Fill the tube up until the length of your door frame.

B proudly holding our first filled door snake. =) This is before cutting off the extra end material and sewing up the open end. Also of note, kitty litter is cheap but very dusty. Maybe try rice in yours.

Step 7: Fold the ends in by about 1/4 inch so that you have 4 layers of material. This puts the frayed, cut ends on the inside and creates a cleaner look & hemline.

 

Step 8: Sew along the double fold at the end. Make sure it is nice and tight, and goes all the way to both sides of material. You don’t want filler bits leaking out on your floor.

Step 9: Make sure your door snake is the right size for your door frame, and admire your hard work.

 

There you have it. A simple solution to cold wintry drafts that saves you from needing to double-sock and saves you some cash. You can re-use these for years, depending on the type of material and your level of sewing prowess. I’ve even heard of people sewing extra washable covers for these so they can wash the cover when it gets dusty/muddy/gross.

What’s your favorite money-saving craft idea?